Alseal 610 is a high temperature air dry coating for use as a touch up for Alseal 598 sealer where scratches or abraded areas
in the sealer result from assembly of components. It is used to protect and seal the underlying base coat (Alseal 518) in
these areas.
Surface Preparation
The areas to be touched up should be thoroughly degreased using a degreasing solvent such as alcohol or methyl ethyl
ketone. It is important that the degreasing solvent used does not leave a residue.
Application
Mix thoroughly before use. Alseal 610 can be applied by brush or spray. An artist air brush is suggested. Since areas to be
touched up will usually be small, an artist paint brush may also be used. Material should be applied in a thin coat to avoid
excessive build up and insure a smooth touch up area.
Clean Up
Clean equipment with hot water immediately after use. If coating dries on equipment an alkali water solution may be
necessary to remove coating.
产品名称：ALSEAL 610 TOPCOAT TOUCH-UP
产品手机链接：http://m.vooec.com/product_208105992.html
产品网站链接：http://www.vooec.com/cpshow_208105992/