5.5英寸TFT液晶显示屏2K屏
1.Handling Precautions
1.1 Mounting method
The LCD panel of AMELIN LCD module consists of two thin glass plates with polarizes which easily be damaged. And since the module in so constructed as to be fixed by utilizing fitting holes
in the printed circuit board.
Extreme care should be needed when handling the LCD modules.
1.2 Caution of LCD handling and cleaning When cleaning the display surface, Use soft cloth with solvent [recommended below] and wipe lightly.
Do not wipe ITO pad area with the dry or hard materials that will damage the ITO patterns Do not use the following solvent on the pad or prevent it from being contaminated:
If goods were sent without being sili8con coated on the pad, ITO patterns could be damaged due to the corrosion as time goes on.
If ITO corrosion happen by miss-handling or using some materials such as Chlorine (CI),Salfur (S) from customer, Responsibility is on customer.
1.3 Caution against static charge
The LCD module use C-MOS LSI drivers, so we recommended that you:
Connect any unused input terminal to Vdd or Vss, do not input any signals before power is turned on, and ground your body, work/assembly areas, assembly equipment to protect against
static electricity.
1.4 packing
a. Module employ LCD elements and must be treated as such.
b. *void intense shock and falls from a height.
c. To prevent modules from degradation, do not operate or store them exposed direct to sunshine or high temperature/humidity
1.5 Caution for operation
a. It is an indispensable condition to drive LCD’s within the specified voltage limit since the higher voltage then the limit cause the shorter LCD life.
b. An electrochemical reaction due to direct current causes LCD’s undesirable deterioration, so that the use of direct current drive should be *voided.

产品名称：5.5英寸TFT型液晶显示屏 1440X2560
产品手机链接：http://m.vooec.com/trade_448148046.html
产品网站链接：http://www.vooec.com/sjshow_448148046/