Surface Finish (RMS)
Our Series 100 coatings will typically increase the RMS surface roughness on wrought alloys between 5 to 15 micro-inches and between 20 to 60 micro-inches on cast alloys. Although the increase in roughness is significantly offset with our polymer infusion, we recommend that you finish to an RMS value better than required.

我们的100系列涂层将典型地增加铸造合金在5到15微英寸和20到60微英寸之间的锻造合金表面粗糙度。虽然增加的粗糙度是显着抵消了我们的聚合物输液，我们建议您完成的RMS值比所需的更好。
产品名称：Endura® 103B
产品手机链接：http://m.vooec.com/trade_474248378.html
产品网站链接：http://www.vooec.com/sjshow_474248378/