Coating Thickness
Our Series 500 coatings are applied utilizing a time controlled deposition process, which allows us to specify a wide range of thicknesses and hold tight tolerances. Depending on your application requirements, we routinely apply coatings as thin as 0.0002” per surface or as thick as 0.002” per surface, holding tolerancing within 0.0001” per surface. Our nominal thickness that we specify for the majority of our 500 Series coatings is 0.001”, which is held within +/- 0.0002” per side.
Surface Finish (RMS)
500 Series coatings are uniform and extremely conformal in nature. Unless you instruct Endura to grit blast prior to coating application, the majority of our 500 Series coatings will replicate your parts’ surface geometries and closely mirror their existing RMS surface values. If desired, 500 Series coatings are capable of being polished to a SPI A2 finish.
涂层厚度
我们的500系列涂层采用了时间控制沉积工艺，使我们能够指定广泛的厚度范围，并保持严格的公差。根据您的应用要求，我们通常会使用厚度为每面0.0002英寸或每面0.002英寸厚的涂层，每个表面保持公差不超过0.0001。我们为我们的500系列涂层的大部分指定的公称厚度是0.001“（在+/-中）0.0002”每边。
表面光洁度
500系列涂层是均匀的，在本质上是非常一致的。除非你指导Endura为了在喷涂前进行喷砂处理，我们的500系列涂层将复制您的零件的表面几何形状，并密切反映其现有的均方根表面值。如果需要，500系列涂层可以抛光到SPIA2完成。
产品名称：Endura® 500RV
产品手机链接：http://m.vooec.com/trade_474249563.html
产品网站链接：http://www.vooec.com/sjshow_474249563/